Toshiba BDX1200KY 用户手册
1
E
ng
lis
h
[TV]
• [TV Screen]
• [TV Screen]
Select.the.screen.format.according.to.
how.you.want.the.picture.to.appear.on.
the.TV.
{16:9 Full}.–.for.a.disc.with.the.aspect.
ratio.of.4:3,.the.output.video.is.
stretched.into.16:9.full.screen.
{16:9 Normal}.–.for.a.disc.with.the.
aspect.ratio.of.4:3,.the.output.video.is.
resized vertically to match what will be
seen.on.the.display.
{4:3 Pan&Scan}.–.for.standard.TV,.
Display.a.wide.picture.on.the.entire.
screen.and.cuts.off.the.redundant.
portions.
{4:3 Letterbox}.–.for.standard.TV,.
Display.a.wide.picture.with.two.black.
borders.on.the.top.and.bottom.of.4:3.
screen.
• [Resolution]
Select.a.video.output.resolution.that.is.
compatible.with.your.TV.display.
capability.
{Auto}.–.Select.the.most.suitable.
resolution.according.to.the.TV..
{480i/576i},.{480p/576p},.{720p},.
{1080i},.{1080p}.
–.Select.a.video.resolution.setting.that.
is.best.supported.by.the.TV
. See.TV.
manual.for.details.
Note:
Note:
-When resolution is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automatically.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automatically.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
• [Color Space]
Select a predefined Colour space of
picture.
{RGB}.–.select.RGB.Colour.space.
{YCbCr}.–.select.YCbCr.Colour.space.
{YCbCr422}.–.Select.YCbCr422.Colour.
space.
{Full RGB}.–.select.Full.RGB.Colour.
space.
• [HDMI Deep Color]
This.feature.is.available.only.when.the.
display.device.is.connected.by.a.HDMI.
cable,.and.when.it.supports.deep.Colour.
feature.
{30 bits}.–.Output.30.bits.Colour.
{36 bits}.–.Output.36.bits.Colour.
{Off}.–.Output.standard.24.bits.Colour.
Note:
Note:
-When the colour space is "YCbCr422", even if
HDMI Deep Color is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080/24p]
HDMI Deep Color is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080/24p]
{On}.–.Enable.1080/24p.video.
resolution.setting.
{Off}.–.Disable.1080
/24p.video.
resolution.setting.
Notes about HDMI 1080/24p:
If you want the 24Hz output, it should fulfill below
3 conditions:
1.TV supports the 24Hz display;
2.Player choose the 24Hz option in the setup
menu;
3.Media must be the 24Hz video.
Notes:
- This resolution becomes effective only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
[Video Process]
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
[Video Process]
TV
Video Adjust
More...
Low
Low
Video Process
Motion Video...
Sharpness
Display Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
• [Video Adjust]
Select a predefined setting of the video.
1..Press.OK..
2..Press/ to adjust the video
Brightness, Contrast, Hue and Saturation.
{Brightness}-.press./.to.adjust.
the.brightness.of.display,.goes.left.
means.dark.and.right.means.bright.
{Contrast}-..press./.to.adjust.
the.contrast.of.display,.goes.left.
means.low.contrast.and.right.means.
high.contrast.
{Hue}-.press./.to.adjust.the.Hue.
of. display,. goes. left. means. low. hue.
and.right.means.high.hue.
{Saturation}-. press. /. to. adjust.
the. saturation. of. display,. goes. left..
means.low.Saturation.and.right.means.
high.saturation.