Philips HTD3570 用户手册

下载
页码 32
24 EN
8 Troubleshooting
Warning
 
Risk of electric shock. Never remove the casing of the 
product.
To keep the warranty valid, never try to repair 
the product yourself. 
If you have problems using this product, check 
the following points before you request service. 
If you still have a problem, get support at www.
philips.com/support. 
Main unit
The buttons on the home theater do not 
work.
•  Disconnect the home theater from the 
power supply for a few minutes, then 
reconnect.
Picture
No picture.
•  Make sure that the TV is switched to the 
correct source for the home theater.
No picture on a TV connected through HDMI.
•  Make sure that the HDMI cable is not 
faulty. If it is faulty, replace it with a new 
cable.
Disc does not play high-definition video.
•  Make sure that the disc contains high-
definition video.
•  Make sure that the TV supports high-
definition video. 
•  Use an HDMI cable to connect to the TV.
Sound
No sound from home theater speakers.
•  Connect the audio cable from your home 
theater to your TV or other devices. 
However, you do not need a separate 
audio connection when the home theater 
and TV are connected through an HDMI 
ARC connection.
(see 'Set up the audio' on page 11).
page 20), and then switch it off and switch 
on again.
•  On your home theater, press SOURCE 
repeatedly to select the correct audio 
input.
Distorted sound or echo.
•  If you play audio from the TV through the 
home theater, make sure that the TV is 
muted.
Audio and video are not synchronized.
•  1) Press and hold AUDIO SYNC. 2) Press 
the Navigation buttons (left/right) within 
five seconds to synchronize the audio with 
the video.
Play
Cannot play a disc.
•  Clean the disc.
the type of disc (see 'Media formats' on 
•  Make sure that the home theater supports 
the region code of the disc.
•  If the disc is a DVD±RW or DVD±R disc, 
make sure that it is finalized. 
Cannot play a DivX file.
•  Make sure that the DivX file is encoded 
according to the 'Home Theater Profile' 
with the DivX encoder.
•  Make sure that the DivX file is complete.