Toshiba IK-WD01A 用户手册
34
Installation
Appendix
Introduction
How to Use
Defi
nitions in
Confi
guration
Network type
“LAN” & “PPPoE”
The default type is LAN. Select PPPoE if using ADSL.
"Get IP address automatically" & "Use fi xed IP address"
The default status is "Get IP address automatically". This can be tedious having
to perform software installation whenever the Network Camera starts. Therefore,
once the network settings, especially the IP address, have been entered correctly,
select “Use fi xed IP address” then the Network Camera will skip installation at the
next boot. The Network Camera can automatically restart and operate normally after
a power outage.
Note: Users can run IP installer to check the IP address assigned to the Network
Camera if the IP address is forgotten or using the UPnP function provided by the
Network Camera (MS Windows XP provides UPnP function at My Network Place).
The default status is "Get IP address automatically". This can be tedious having
to perform software installation whenever the Network Camera starts. Therefore,
once the network settings, especially the IP address, have been entered correctly,
select “Use fi xed IP address” then the Network Camera will skip installation at the
next boot. The Network Camera can automatically restart and operate normally after
a power outage.
Note: Users can run IP installer to check the IP address assigned to the Network
Camera if the IP address is forgotten or using the UPnP function provided by the
Network Camera (MS Windows XP provides UPnP function at My Network Place).
“IP address” By selecting "Use fi xed IP address", the administrator can modify this
address. This address is required for network identifi cation.
“Subnet mask” This is used to determine if the destination is in the same subnet.
The default value is "255.255.255.0".
“Default gateway” The gateway used to forward frames to destinations in a
diff erent subnet. Invalid router setting will fail the transmission to destinations in a
diff erent subnet.
diff erent subnet.
“Primary DNS” The primary domain name server that translates hostnames into IP
addresses.
“Secondary DNS” Secondary domain name server that backups the Primary DNS.
“Primary WINS server” The primary WINS server that maintains the database of
computer name and IP address.
“Secondary WINS server” The secondary WINS server that maintains the
database of computer name and IP address.
“Enable UPnP presentation” Enable the UPnP camera short cut.
“Enable UPnP port forwarding” Enable the UPnP port forwarding.
“PPPoE” If using the PPPoE interface, fi ll the following settings from ISP.
“User name” The login name of PPPoE account.
“Password” The password of PPPoE account.
“Confi rm password” Input password again for confi rmation.
Network settings (Cont.)