Toshiba IK-WF51R 用户手册

13

S/N:    A1510XXXX
MAC: 0002D1XXXXXX

12V DC,  PoE+(IEEE802.3at) :  -30°C ~ +50 °C  (- 22°F ~ 122 °F) 

PoE(IEEE802.3af): -10 °C ~ +50 °C  (14 °F ~ 122 °F)

l

 

The built-in heater does not work with PoE(IEEE802.3af).

l

 

When the camera is installed and operated in low temperatures below –10 °C {14

°F}, normal images may not be obtained immediately after startup. In such a case,

wait until the camera warms up (taking more than 1 hour) and start adjustment after

turning on the power again.

Record the MAC address under the camera base 

before installing the camera.

Tamper-proof screws

First, use the supplied torx driver to loosen the four screws and detach the dome cover from the 

camera base. Then, follow the steps below to install the camera to either a ceiling or a wall.

Bottom of the camera