Lucent Technologies Release 7 用户手册

Issue 4

June 1999

Maintenance Object Repair Procedures 

9-1798

TONE-PT (Tone Generator) 

Notes:

a. A failure in the tone generation facility on the indicated circuit pack has 

been detected. Replace the circuit pack. See 

Tone-Clock Circuit Pack in the TONE-BD section.

b. The indicated Tone-Clock circuit pack has been made unavailable via the 

busyout tone-clock UUC command. It only applies to systems which 
have the High or Critical Reliability Option administered, because only a 
standby Tone-Clock circuit pack may be made busy by that command. To 
resolve this error, execute the release tone-clock UUC command for the 
alarmed circuit pack.

c. This error type indicates that the circuit pack has been removed or has 

been insane for more than 11-minutes. To clear the error, reinsert or 
replace the circuit pack.

0

1

1.

Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.

0

Any

Any

Any

test tone-clock UUC r 1

1(a)

17664

Tone Generator Audit/

MAJOR/

ON

test tone-clock UUC r 2

Update Test (#41)

MINOR

2

2.

MAJOR alarm if the alarmed Tone-Clock circuit pack is not duplicated; MINOR if it duplicated within
the same Port Network.

18(b)

0

busyout tone-clock 
UUC

WARNING

OFF

release tone-clock UUC

130(c)

 

None

MINOR

ON

test tone-clock UUC Sh

257(d,f)

17667

None

MINOR

ON

513(e,f)

17666

Tone Generator Audit/ 
Update Test (#41)

MINOR

ON

test tone-clock UUC r 3

769

Any

Transmission Test 
(#40)

MAJOR/ 
MINOR

2

ON

test tone-clock UUC r 3

1025

Crosstalk Test (#90)

MAJOR/ 
MINOR

2

ON

test tone-clock UUC l r 2

1281(g)

Any

Tone Generator Audit/ 
Update Test (#41)

MINOR

ON

test tone-clock UUC r 3