Lucent Technologies Release 6 用户手册
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Management Terminal and Activate System
Page 3-21
Administer System Configurations (Release 6r)
3
Change Site-Data
This form initializes the building, floor, and color data to make them available
later in help messages that refer to site information.
later in help messages that refer to site information.
1. At the
Command:
prompt, enter the change site-data command.
The first of 3 pages of site data appears:
2. Enter optional names for the buildings or offices served by the system.
3. Access the remaining site-data pages and fill them in appropriately.
Change Cabinet 1
1. Enter change cabinet 1. A screen similar to
Screen 3-7
appears.
2. Fill in the blanks as required by the location and nature of the cabinet. If
the system is critical reliability, verify the
B
field is set to the processor
option, the
D
field is set to the dup-sw-node option, and the
E
field is set to
the switch-node option.
Screen 3-7.
Typical Change Cabinet 1 Form