Lucent Technologies Release 6 用户手册
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-72
Add the Fiber Optic Cable
5
LASER Product
The DEFINITY ECS may contain a Class 1 LASER device if single-mode fiber
optic cable is connected to a remote Expansion Port Network (EPN). The LASER
device operates within the following parameters:
optic cable is connected to a remote Expansion Port Network (EPN). The LASER
device operates within the following parameters:
■
Maximum Power Output: -5dBm
■
Wavelength: 1310 nm
■
Mode Field Diameter: 8.8 microns
CLASS 1 LASER PRODUCT
IEC 825 1993
IEC 825 1993
!
CAUTION:
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
those specified herein may result in hazardous radiation exposure.
Contact your Lucent Technologies representative for more information.
Cabinet Preparation
1. Open the front door.
NOTE:
Administration may be required before removing the circuit pack in
the following step.
the following step.
Table 5-17.
Quantity
Description
Comcode
1
Pass-thru Tool
847978715
1
Beige SC-SC Fiber Optic Adapter (multimode)
107118903
1
Beige ST-SC Fiber Optic Adapter (multimode)
107087967
1
Ten-foot (3 m) Fiber Optic Cable (multimode)
107122640
1
I/O Connector Adapter Bracket
847978673
1
Fiber Optic Cable Disconnect Label
848029286
10
Cable Ties
407814672
6
Cable Tie Mounts
403053150