Bosch BLCC110U 用户手册
19
Bosch Security Systems 09/06 BLCC110U
Solution 64 User Guide
Output 1 Name O001
Is Off and Ready
Is Off and Ready
Press OK or MENU
The keypad will display the following when the output is
off and missing:
off and missing:
Output 1 Name O001
Is Off and Ready
Connection Trouble
Is Off and Ready
Connection Trouble
Press OK or MENU
The keypad will display the following when the output is
ON and OK:
ON and OK:
Output 1 Name O001
Is ON and Ready
Is ON and Ready
Press OK or MENU
The keypad will display the following when the output is
ON and missing:
ON and missing:
Output 1 Name O001
Is ON and Ready
Connection Trouble
Is ON and Ready
Connection Trouble
Press OK or MENU
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Outputs > Commands >
Turn Output On/Off
MENU 4-0-1
This menu allows you to turn outputs that have been programmed
by your security company on or off. These outputs can be
programmed to control outside lighting, pool pumps, watering
systems etc.
Enter programming mode (PIN + MENU) then,
by your security company on or off. These outputs can be
programmed to control outside lighting, pool pumps, watering
systems etc.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [4] + [0] + [1].
If a valid PIN is required, the keypad will prompt you to
enter your PIN.
enter your PIN.
2. Use the [
↑] and [↓] keys to select the output name
that you want to change, then press [OK] to select.
Alternatively, you can enter the output number, then
press [OK].
Alternatively, you can enter the output number, then
press [OK].
3. To toggle the output on or off, use the [ON] and [OFF]
keys.
The keypad will display the following when the output is
off:
off:
Output 1 Name O001
Output is OFF,
To Turn ON,Press ON.
Output is OFF,
To Turn ON,Press ON.
To Go Back Press OK
To turn the output on, press [ON].
The keypad will display the following when the output is
on:
on:
Output 1 O001
Output is ON,
To Turn OFF,Press OFF.
Output is ON,
To Turn OFF,Press OFF.
To Go Back Press OK
To turn the output off, press [OFF].
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Outputs > Properties >
Output Name
MENU 4-1-0
This menu allows you to program the name for each output.
Each output name supports up to 16 characters.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [4] + [1] + [0].
Each output name supports up to 16 characters.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [4] + [1] + [0].
A list of different outputs will display on the keypad.
2. Use the [
↑] and [↓] keys to select the output name
that you want to change, then press [OK] to select.
Alternatively, you can enter the output number, then
press [OK].
Alternatively, you can enter the output number, then
press [OK].
The keypad will display the following:
Output Name O001
Output 1
Press
◄►
OK to SAVE
3. Use the [
←] and [→] keys to scroll the cursor left and right
across the output name text. Use the [
↑] and [↓] keys to
scroll through the different characters available. To clear
all text from the cursor position to the right, press the
[OFF] key.
all text from the cursor position to the right, press the
[OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.