Jacuzzi EH20 产品宣传页

下载
页码 2
Technical Specifications
DimenSionS
66" L x 66" W x 22
3
4
" H
(1676) mm L x (1676) mm W x (578) mm H
Drain/overflow
A: 16
13
16
" (427  mm)  B: 12
1
8
" (308 mm)
CuTouT
See Below
ToTal weighT
TBD
operaTing gallonage
TBD
proDuCT weighT
TBD
SkirT mounTing
Not Available
eleCTriCal SpeCifiCaTionS  
requires a dedicated gfCi protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP,  60 Hz.
RapidHeat™: 120 VAC, 15 AMP,  60 Hz.
heaTer (STanDarD) 
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath  •  14880 Monte Vista Avenue  •  Chino, CA 91710  •  www.jacuzzi.com
inSTallaTion noTeS
Refer to installation instructions included with fixture before 
beginning installation. Please confirm product availability and 
specifications before commencing with any installation work.
 
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT 
TO CHANGE WITHOUT NOTICE.
#FR44000 10/07
fuzion
 6666 
whirlpool BaTh with ChromaTherapy
eh20
Fuzion™ 6666 Whirlpool Bath Teak,  Left Hand
eg90
Fuzion™ 6666 Whirlpool Bath Teak,  Right Hand
eh25
Fuzion™ 6666 Whirlpool Bath Wenge,  Left Hand
eg95
Fuzion™ 6666 Whirlpool Bath Wenge,  Right Hand
fuzion
 6666 
whirlpool BaTh with illumaTherapy
eh35
Fuzion™ 6666 Whirlpool Bath Teak,  Left Hand
eh05
Fuzion™ 6666 Whirlpool Bath Teak, Right Hand
eh40
Fuzion™ 6666 Whirlpool Bath Wenge,  Left Hand
eh10
Fuzion™ 6666 Whirlpool Bath Wenge, Right Hand
• Center Drain Location
• Overflow fitting comes with tub
• Accessories / Hardware:
 
HTC Jet Trim Kit: #D095
 
Oval Trim Kit: #N557
 
BMH 2 Jet trim Kit: # J869 (2 kits required)
• Trim Kit Finishes Available:
 
(827) – Chrome 
 
(898) – Brushed Chrome
 
(815) – Satin Nickel 
 
(829) – Bright Brass
 
(805) – Platinum 
 
(826) – Brushed Nickel
 
(845) – Oil Rubbed Bronze
faucet installation note:
Selecting a faucet for rim 
mounting: The combined 
thickness at the rim of the 
tub shell and the wood 
trim is 2" (50,8 mm) 
nominal.  The length of 
the faucet tailpiece(s) must 
be long enough to extend 
past this dimension and 
have ample clearance to 
assemble any hardware 
(i.e. locknut, water supply 
fittings, etc.) necessary for 
installation. 
Motor
12" H x 18" L
Service Access
Heater (S)
46.61"
66"
20" X 4"
32.97"
Ref.
66"
37.23"
9.29"
32.97"
40.94"
40.94"
69.68"
FUZION 6666 CORNER WITH WOOD FRAME 
LEFT HAND MOTOR
(Heater)
(Motor)
L
H
W
(159 mm)
6-1/4"
SIDE VIEW
END VIEW
DRAIN/OVERFLOW
B
A
product Shown: fuzion™ 6666  whirlpool Bath Teak 
with illumatherapy  left hand  model: eh35
* Measurements  inside unit represent cutout in floor to 
allow for drain/overflow.
Minimum Service Access dimensions given. 
48"
65"
32"
Ref.
67-1/2"
65"
32"
DRAIN
Motor
Blower
CuTouT