Shindaiwa LE254 用户手册

下载
页码 28
3
Work Safely
This machine operates at very high 
speeds and has the potential to do 
serious damage if misused, abused 
or mishandled. To reduce the risk 
of injury, you must maintain control 
at all times, and observe all safety 
precautions during operation. Never 
permit a person without training or 
instruction to operate this machine!
Safety
WARNING!
Never make unauthorized 
attachment installations.  Do not  
use attachments not approved by 
Shindaiwa for use on this unit.
WARNING!
Never operate power 
equipment of any kind if you 
are tired or if you are under the influ-
ence of alcohol, drugs, medication or 
any other substance that could affect 
your ability or judgement.
WARNING!
Use Good Judgement
Stay Alert
You must be physically and mentally fit 
to operate this unit safely.
ALWAYS wear eye protection to 
shield against thrown objects.
NEVER run the engine when  trans-
porting the unit.
NEVER run the engine indoors! Make 
sure there is always good ventila-
tion. Fumes from engine exhaust can 
cause serious injury or death.
ALWAYS use the proper cutting tool 
for the job.
ALWAYS clear your work area of trash 
or hidden debris that could be thrown 
back at you or toward a bystander.
ALWAYS stop the engine immedi-
ately if it suddenly begins to vibrate 
or shake. Inspect for broken, miss-
ing or improperly installed parts or 
attachments.
ALWAYS keep the unit as clean as 
practical. Keep it free of loose  veg-
etation, mud, etc.
ALWAYS hold the unit firmly with 
both hands and maintain control at 
all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug 
wire before performing any  mainte-
nance work.
50 FEET
(15m)
KEEP BYSTANDERS AWAY
AT LEAST 50 FEET (15m)
BEWARE OF THROWN OR
RICHOCHETED OBJECTS
KEEP AWAY FROM
ROTATING BLADE
Shindaiwa 
READ THE 
OPERATOR’S MANUAL
WEAR HEARING AND 
ANSI Z87.1 APPROVED 
EYE PROTECTION
P/N 19422-00046
IMPORTANT!
Safety and Operation Information Labels: Make sure all 
information labels are undamaged and readable. Imme-
diately replace damaged or missing information labels. 
New labels are available. Contact your local authorized 
Shindaiwa dealer.
This label indicates the minimum distance between 
front handle and rear grip per ANSI B175.3.
HOT SURFACE
Product Description