Akai dps24 用户手册

FX PARAMETERS

This section describes all types and parameters of the effects included in the DPS24's internal effects. 

The FX page shows a graphic representation of the currently selected effect, and the parameters for 
that effect can be edited using the Q-Link knobs Q1-Q6. 

If there are more than six parameters for the selected effect, the [F5] softkey  provides access 
to a second set of parameters for that effect: 

REVERB 

Although the parameter values of the following reverb types are different, the available pa­
rameters are common to all reverb types (except Non-Linear and Reverse reverb). 

• Pre-D

(1ms - 100ms)

Adjusts the Pre-Delay time of early reflections. 

• Time 

(0.1sec - 10sec) Adjusts the Time of attenuation of reverberation. 

• Diff 

(0% - 100%)

Adjusts the Diffusion (density) of reverberation. 

• HFDamp (20Hz - 20kHz) Frequency at which the higher range of reverberation is cut. 

• Width

(0% - 100%)

Adjusts the width and spread of the stereo image. 

• Near

(0% - 100%) 

Adjusts the imaginary distance to the sound source. 

The lower the value, the more depth and distance.