Akai dps24 用户手册

FX PARAMETERS

This delay effect simulates a three-head tape echo machine. You can set three delay times 
individually. This effect has mono-in and mono-out; however, you can adjust the pan 
setting of the effect sound. 

• Head 1 

(1ms - 1500ms)  Adjusts the Delay time of Head 1. 

• Head 2 

(1ms - 1500ms)  Adjusts the Delay time of Head 2. 

• Head 3 

(1ms - 1500ms)  Adjusts the Delay time of Head 3. 

• Fdback 

(0% - 100%) 

Adjusts the amount of delay Feedback . 

• HFdamp  (20Hz - 20kHz)  Sets a frequency at which the higher range of the feed­

back sound is cut. 

• Pan 

(-60 - +60) 

Adjusts the stereo image of the effect sound. 

This delay effect creates a special effect by adjusting the interval between feedback sounds 
and the level change curve of the feedback sounds. 

• Delay 

(1ms - 1500ms)  Adjusts the delay time. 

• Width 

(0% - 100%) 

Adjusts the width and spread of the stereo image. 

• Shape 

(-10 - +10) 

Adjusts the interval between the feedback sounds. 

• Slope 

(-10 - +10) 

Adjusts the attenuation curve of the feedback sound. 

• Fdback 

(0% - 100%) 

Adjusts the amount of delay feedback. 

• Pan 

(-60 - +60) 

Adjusts the stereo image of the effect sound.