Akai dps24 用户手册
ROTARY SPEAKER
141
ROTARY SPEAKER
ROTARY SPEAKER
This mono-in / stereo-out effect simulates rotary speakers for organ sound.
• Rate1
(0.1Hz - 10.0Hz)
Adjusts the rotation speed (Rate1) of the speakers.
• Rate2
(0.1Hz - 10.0Hz)
Adjusts the rotation speed (Rate2) of the speakers.
• Accel
(0.1sec - 10sec)
Adjusts the time (duration) taken for switching from
Rate1 to Rate 2.
Rate1 to Rate 2.
• Init
(R1/R2)
Sets the initial rotation speed (Rate1/Rate2).
Pressing the additional [F5] TRIGGER softkey
repeatedly toggles the rotation speed between
Rate 1 and Rate 2.
repeatedly toggles the rotation speed between
Rate 1 and Rate 2.
Use the Accel parameter to adjust the time (du
ration) taken for switching between two
speeds.
ration) taken for switching between two
speeds.
PAN
AUTO PAN
This auto pan effect automatically rotates the stereo image of the sound between left and right.
• Rate
(0.1Hz - 10.0Hz) Adjusts the speed of panning.
• Mode
Pan:
A common auto pan.
L>R: Simulates a sound source that rotates counterclockwise.
R>L: Simulates a sound source that rotates clockwise .
R>L: Simulates a sound source that rotates clockwise .
• Width (0% - 100% )
Adjusts the panning width.
TRIGGERED PAN
This auto pan effect becomes enabled when the output
level of one of AUX sends 1 - 4 exceeds a certain level.
level of one of AUX sends 1 - 4 exceeds a certain level.
You can also press the [F5] (TRIGGER) softkey to start
the auto pan effect manually.
the auto pan effect manually.
• Rate
(0.1Hz - 10.0Hz) Adjusts the speed of panning.
• Mode
(Pan / L>R / R>L) Sets the effect of pan
ning. (Refer to AUTO PAN.)
• Trigger
AUX-1 - AUX-4
Selects which AUX signal enables the auto pan effect.
MANUAL
Pressing the [F5] key triggers the auto pan effect.
• Thresh
(-60dB - 0dB)
Sets the signal level at which the auto pan becomes effective.
• Width
(0% - 100%)
Adjusts the panning width.
v1.6 Operator
’s Manual