Akai dps24 用户手册
SETUP MODE
167
You should respond accordingly.
As the prompt advises, please bear in mind that changing the sample rate will cause the
project to play back at the wrong speed.
project to play back at the wrong speed.
DIGITAL SYNC
Selects the digital clock source. The options are:
INTERNAL
The DPS24 will sync to its own internal clock
WCLK
The DPS24 will sync to a sync source connected to the
Wordclock BNC connector on the rear of the DPS24.
Wordclock BNC connector on the rear of the DPS24.
SPDIF
The DPS24 will sync to a digital audio source connected
to the co-axial digital input on the rear of the DPS24.
to the co-axial digital input on the rear of the DPS24.
ADAT 1..8
The DPS24 will sync to a digital audio source connected
to the optical digital input on the rear of the DPS24.
to the optical digital input on the rear of the DPS24.
ADAT 9..16, 17..24
The DPS24 will sync to a digital audio source connected to
the selected optical digital input on the ADAT option board.
the selected optical digital input on the ADAT option board.
External clock should match the sampling rate set for the current project.
NOTE:
Certain operations will also be unavailable to you on the DPS24.
If the selected digital sync source is not available, you will receive a prompt informing you.
Also, to prevent unwanted noise, all audio is automatically muted and the top of the LCD will show:
To remedy this situation, you should either select INTERNAL or you should attend to the digital sync
source's problem.
source's problem.
T/C RATE
Sets the SMPTE/EBU TimeCode rate. The options are 24 FPS, 25 FPS,
29.97 FPS, 29.97D FPS, 30 FPS and 30D FPS.
29.97 FPS, 29.97D FPS, 30 FPS and 30D FPS.
The T/C RATE should match any incoming external timecode. If it does
not, synchronisation will slip.
not, synchronisation will slip.
TIME SYNC
This sets how the DPS24 will behave with respect to receiving and/or
generating timecode when the EXT SYNC key is enabled.
generating timecode when the EXT SYNC key is enabled.
The options are:
OFF
MTC SLAVE
The DPS24 will follow external MIDI timecode allow
ing it to synchronise to external sequencers, drum ma
chines, etc..
ing it to synchronise to external sequencers, drum ma
chines, etc..
MTC MASTER
The DPS24 will generate MIDI timecode allowing se
quencers, drum machines, etc., to follow the DPS24.
quencers, drum machines, etc., to follow the DPS24.
MIDI CLK OUT
The DPS24 will generate MIDI clock with Song Position
Pointer to act as a master controller for external sequenc
ers, drum machines, etc..
Pointer to act as a master controller for external sequenc
ers, drum machines, etc..
SMPTE SLAVE
The DPS24 will follow external SMPTE timecode via the
optional SMPTE card.
optional SMPTE card.
NOTE 1:
The TIME SYNC options are enabled/disabled using the EXT. SYNC key.
NOTE 2:
The SMPTE board (if installed) always generates SMPTE timecode during playback.
v1.6 Operator’s Manual