Akai dps24 用户手册

WARNING 

For U.K. customers only 

This equipment is fitted with an approved non-rewireable UK mains plug.
To change the fuse in this type of plug proceed as follows:
1)  Remove the fuse cover and old fuse.
2)  Fit a new fuse which should be a BS1362 5 Amp A.S.T.A or BSI approved type.
3)  Refit the fuse cover.
If the AC mains plug fitted to the lead supplied with this equipment is not suitable for your type of
AC outlet sockets, it should be changed to an AC mains lead, complete with moulded plug, to the 
appropriate type. If this is not possible, the plug should be cut off and a correct one fitted to suit the 
AC outlet. This should be fused at 5 Amps. 
If a plug without a fuse is used, the fuse at the distribution board should NOT BE GREATER than 
5 Amp. 

PLEASE NOTE: 

THE SEVERED PLUG MUST BE DESTROYED TO AVOID A POSSIBLE 
SHOCK HAZARD SHOULD IT BE INSERTED INTO A 13 AMP SOCKET 
ELSEWHERE. 

The wires in this mains lead are coloured in accordance with the following code: 

 and YELLOW 

— Earth 

— Neutral 

— Live 

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured 
markings identifying the terminals in your plug, please proceed as follows: 

The wire which is coloured GREEN and YELLOW must be connected to the terminal which is 
marked with the letter E or with the safety earth symbol  or coloured GREEN or coloured 
GREEN and YELLOW. 
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or  coloured RED.

Ensure that all the terminals are securely tightened and no loose strands of wire exist.
Before replacing the plug cover, make certain the cord grip is clamped over the outer sheath of the
lead and not simply over the wires.

6D-En