Samson Acoustic Pre-Amp 用户手册
!
"
#
$
%
&
'
A
Power Inlet – Power inlet for connect-
ing the optional AD006 9 Volt power
adapter.
ing the optional AD006 9 Volt power
adapter.
B
PHANTOM ON / GROUND LIFT switch -
Used to switch between phantom power
or battery operation, and/or Ground Lift/
Connect.
Used to switch between phantom power
or battery operation, and/or Ground Lift/
Connect.
C
OUTPUT - �/�-inch jack carrying the
line-level output signal, either affected or
un-affected, depending on the ON/OFF
switch.
line-level output signal, either affected or
un-affected, depending on the ON/OFF
switch.
D
PAD switch – Push switch used to cut
the level sent to the Direct Output by �0
dB.
the level sent to the Direct Output by �0
dB.
E
DIRECT OUTPUT - XLR balanced output
connector carrying the mic-level output
signal, either affected or un-affected,
depending on the ON/OFF switch.
connector carrying the mic-level output
signal, either affected or un-affected,
depending on the ON/OFF switch.
F
DIRECT INPUT - Standard �/�-inch input
jack for connecting an additional signal,
like from another effect, that bypasses
the processing, but can be mixed with
the signal connected to the Acoustic
Attack's INPUT.
jack for connecting an additional signal,
like from another effect, that bypasses
the processing, but can be mixed with
the signal connected to the Acoustic
Attack's INPUT.
G
INPUT – Standard �/�-inch input jack for
connecting a passive or active Acoustic.
connecting a passive or active Acoustic.
Acoustic Attack Side Panel Layout
4