Zoom 7072 用户手册

Universal type compressor that controls attack rate in
two stages. 

Adjusts time interval from signal onset to start of
compression. 

Adjusts compressor sensitivity.

Adjusts signal level after passing module.

Isolator that allows cutting or emphasizing a particular
band. There are two pages with parameters. Use the
[EDIT] key to switch between pages.

■ PAGE 1

-12 – 12

Adjusts high-range mix. 

-12 – 12

Adjusts midrange mix. 

-12 – 12

Adjusts low-range mix.

■ PAGE 2

Adjusts crossover frequency for low and mid range.

Adjusts crossover frequency for mid and high range. 

Adjusts signal level after passing module.

Effect

Types

and

P

arameters

In this section, all effect types and parameters of the modules in the 707II are explained. 
The 

symbol indicates a parameter that is assigned to the expression pedal and can be

changed by moving the pedal (

→

p. 23). The symbols 

– 

indicate the parameters that

can be controlled by parameter knobs 1 – 3 in play mode. 

Selects boost setting. 

The isolator allows cutting or emphasizing a particular band. The compressor serves to reduce excessive signal levels. 

This module amplifies the input signal. The amount of boost can be set to Low (1) or High (2). 

Classic bluesy sound of a built-in tube amp 

Clean sound of a built-in tube amp 

Drive sound of a built-in tube amp 

Old-style sound of a British tube stack amp 

Crunch sound of a British tube stack amp 

Drive sound of a British tube stack amp 

Old-style sound of a tube combo amp with gutsy
midrange 

Drive sound of a tube stack amp with gutsy midrange 

Metal sound of a tube stack amp with gutsy midrange 

Old-style crunch sound 

Clean and bright combo amp sound 

Warm and powerful combo amp sound 

This module comprises 30 types of distortion and acoustic simulator effects. The [DRIVE] knob allows choosing the
amplifier or compact effect type, and the [DRIVE VARIATION] key allows choosing the tone or distortion variation.