Toshiba B-SV4D-GS 用户手册
- 170 -
6.4.2
FINE ADJUSTMENT VALUE SET COMMAND
[ESC] Z2; 2
Function
Sets various fine adjustment values on the printer.
Format
[ESC] Z2; 2, abbbcdddeffghhhijjkllmnnoppqqrr [LF] [NUL]
Term
a:
Indicates the direction, forward or backward, in which a feed length fine
adjustment is to be made.
+:
Ignore
-: Ignore
bbb: Feed length fine adjustment value
Ignore
c:
Indicates the direction, forward or backward, in which a cut position (or strip
position) fine adjustment is to be made.
+:
Ignore
-: Ignore
ddd: Fine adjustment value for the cut position (or strip position)
Ignore
e:
Indicates whether the back feed is to be increased or decreased.
+: Ignore
-: Ignore
ff:
Back feed length fine adjustment value
Ignore
g:
Indicates the direction, positive or negative, in which the X-coordinate fine
adjustment is to be made.
+: Positive direction
-: Negative
direction
hhh: X-coordinate fine adjustment value
000 to 995 (in units of 0.5 mm)
*1
i:
Indicates whether to increase or decrease the density in the thermal transfer print
mode.
+:
Ignore
-: Ignore
jj:
Print density fine adjustment value (for the thermal transfer print mode)
Ignore
k:
Indicates whether to increase or decrease the density in the direct thermal print
mode.
+:
Ignore
-: Ignore
ll:
Print density fine adjustment value (for the direct thermal print mode)
Ignore
m:
Fine adjustment direction for the ribbon rewind motor voltage
-: Ignore
nn:
Fine adjustment value for the ribbon rewind motor voltage
Ignore