Datalogic Scanning 1000 用户手册

 

 
 
The following can be used as a checklist to verify all of the steps necessary for 
complete installation of the Matrix-1000

 compact 2D reader. 

 

1)  Read all information in the section "Safety Precautions" at the beginning of this 

manual. 

 

2)  Correctly mount the reader using the bracket provided (sub-pars. under 2.2). 

 

3)  Position the reader at the correct reading distance according to your model 

 

4)  Make electrical connections to your Matrix-1000™ reader by either: 

a) 

Connecting the test cable to the Matrix-1000™ reader (par.2.4). 

b) 

Providing correct and complete system cabling according to the signals        

necessary for the layout of your application. 

• 

Layout: Point-to-point or Multidrop, etc. (sub-pars: 2.6); 

• 

Cabling: Power, Main RS485, Auxiliary RS232, External Trigger Input 

and Output (sub-pars. under 2.3). 

 

5)  Configure the Matrix-1000™ reader by installing and running VisiSet™ from the 

CD-ROM provided onto the configuration PC (pars. 3.1, 3.2, 3.3). See the 
Rapid Guide to Configuration in the VisiSet™ Help On Line. The main steps 
are: 

a) 

Select the codes to be read 

b) 

Set-up the communication parameters 

c) 

Define data formatting parameters 

d) 

Fine tune your Matrix-1000™ reader using the VisiSet™ Calibration Tool 

 

Specific VisiSet™ parameter details are also available in the Help On Line. 

 

6)  Exit the configuration program and run your application. 

 
 
The installation is now complete.