Ricoh 1008 用户手册

To make copies the same size as your originals.

Lift the platen cover and place the

original face down on the exposure

glass. Align the center of your
original with the arrow mark on the

scale. Lower the platen cover.

If your copier includes an enlarge-
ment/ reduction feature (Type 2

panel only), make sure the magni-

fication ratio is set to Full Size. If

not, press the Reduce/Enlarge

key until Full Size indicator is lit.

Enter your desired number of copies

using the + key (to increase copy num-

ber) or - key (to reduce copy number).

l 

Up to 50 copies can be entered.

l 

To reset the number to 1, press the Clear/

Stop key.

l 

When copy counter is 1, pressing the -

key changes the counter to 50. Likewise,

0

when the-counter is 50, pressing the + key

changes the counter to 1.

Press the Start key.

l 

To stop the machine during a multi-copy

run, press the Clear/Stop key.

l 

To resume copying, press the Start key.

l 

To clear the copy counter, press the

Clear/Stop key.

If you press the Start key during warm-up, the

Start indicator will blink in red and green. The

copier will start copying when warm-up is
completed.

l 

To cancel Auto Start, press the Clear/Stop key.