Toshiba e-STUDIO451c 用户手册
June 2005 © TOSHIBA TEC
e-STUDIO281c/351c/451c ADJUSTMENT
3 - 33
3
3.5.11
Adjustment of smudged/faint text
The smudge/faint text at a Black Mode can be set at the following codes.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment.
ment.
Note:
Note:
Remember the image specifications and life span of the replacing parts may not meet the stan-
dard when the setting value is changed from the default value.
dard when the setting value is changed from the default value.
<Procedure>
Procedure is same as that of "3.5.3 Density adjustment".
Procedure is same as that of "3.5.3 Density adjustment".
3.5.12
Adaptation to highlighter
Four modes of one touch adjustment are performed and each mode can be switched into two modes;
highlighter 1 or 2. This adjustment is performed when the reproduction mode for highlighter is needed.
highlighter 1 or 2. This adjustment is performed when the reproduction mode for highlighter is needed.
<Adjustment Mode (05)>
Note:
Note:
The color may not always be reproduced precisely due to the characteristics of fluorescent ink.
Original mode
Item to be adjusted
Remarks
Text/Photo
648
Adjustment of
smudged/ faint text
When the value increases, the faint
text is improved. When the value
decreases, the smudged text is
improved.
Acceptable values: 0 to 255.
(Default: 30)
Code
One touch adjustment
Remarks
1769
Vivid
0: Default (Vivid / Clear / Warm / Cool)
1: Highlighter 1
2: Highlighter 2
1770
Clear
1771
Warm
1772
Cool