Toshiba e-STUDIO451c 用户手册

e-STUDIO281c/351c/451c ADJUSTMENT

June 2005 © TOSHIBA TEC

3 - 38

The color deviation amount of the secondary scanning direction can be adjusted.

For the adjustment procedures, see Chapter 3.5.2 “Color Deviation Adjustment”.

Since color deviation adjustment in the copying function is in common with that in the printer 
function, it does not need to be done if already performed in the copying function. 

The gamma balance is adjusted by adjusting the density at the Black Mode. The adjustment is per-
formed by selecting its density area from the following: low density, medium density and high density.

<Adjustment Mode (05)>

<Procedure>

(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the codes to be adjusted (language and screen) and press the [START] button.
(3) Key in the value corresponding to the density area to be adjusted (0, 1 or 2) and press the 

[START] button.
0: Low density (L) 1: Medium density (M) 2: High density (H)

(4) Key in the adjustment value. (To correct the value once keyed in, press [CLEAR] button.)
(5) Press the [ENTER] or [INTERRUPT] button to store the value in memory. ? The equipment goes 

back to the ready state.

(6) For resetting the value, repeat step (2) to (5).
(7) Let the equipment restart and perform printing job.
(8) If the image density has not been attained, repeat step (1) to (7).

Black

596-0

597-0

598-0

599-0

Low density

The larger the value is, the 

density of the item to be 

adjusted becomes darker.

Acceptable values: 0 to 255.

(Default: 128)

596-1

597-1

598-1

599-1

Medium density

596-2

597-2

598-2

599-2

High density