Toshiba e-STUDIO451c 用户手册

e-STUDIO281c/351c/451c ADJUSTMENT

June 2005 © TOSHIBA TEC

3 - 46

3.7.9

Fine adjustment of black density

The density of black side on scanned image is adjusted at color-scanning.

Note:

Be careful for the value not to be too large since the gradation is reproduced worse in darker
side.

(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the codes and press the [START] button.
(3) Key in the adjustment values. Acceptable values : 0 to 4. (To correct the value once keyed in,

press [CLEAR] button.)

(4) Press the [ENTER] or [INTERRUPT] button to store the value in memory. ? The equipment goes

back to the ready state.

(5) Let the equipment restart and perform scanning job.
(6) If the desired image has not been attained, repeat step (1) to (5).

3.7.10

RGB conversion method selection

The color space conversion method of image is decided at color-scanning.

(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the codes and press the [START] button.
(3) Key in the adjustment values. Acceptable values : 0 to 3. (To correct the value once keyed in,

press [CLEAR] button.)

(4) Press the [ENTER] or [INTERRUPT] button to store the value in memory. ? The equipment goes

back to the ready state.

(5) Let the equipment restart and perform scanning job.
(6) If the desired image has not been attained, repeat step (1) to (5).

Code

Original mode

Remarks

1075

Text

The larger the value is, the black side of the image becomes darker.

Acceptable values: 0 to 4 (Default: 0)

1076

Printed Image

1077

Photo

Code

Original mode

Remarks

1080

Text

Remarks

0: sRGB, 1: AppleRGB, 2: ROMMRGB, 3: AdobeRGB

(Default: 0)

1081

Printed Image

1082

Photo