Toshiba FC-210 用户手册

FC-210/310 ERROR CODES AND SELF-DIAGNOSIS

1 - 6

February 2002 © TOSHIBA TEC

1. 2 Self-Diagnosis Mode

Mode

Starting

Contents

Exit

Control panel check

[0]+[1]+[POWER]

All control panel LEDs are lit,

[CLEAR] or

mode

and all LCD pixels are turned

[POWER]OFF/ON

ON/OFF repeatedly.

Test mode

[0]+[3]+[POWER]

Input/output signals are checked.

[POWER]OFF/ON

Test print mode

[0]+[4]+[POWER]

A test pattern print is made.

[POWER]OFF/ON

Adjustment mode

[0]+[5]+[POWER]

Adjustment of various items

[POWER]OFF/ON

Setting mode

[0]+[8]+[POWER]

Setting of various items

[POWER]OFF/ON

List printing mode

[9]+[START]+[POWER]

Printing of list of 05 and 08 code

[POWER]OFF/ON

data

Note:

Starting for various modes:

While pressing simultaneously the two digital keys corresponding to the mode you want to set

(for example, [0] and [5]), turn ON the main switch [POWER].

CLEAR

POWER OFF/ON

(LEDs light/LCD flashes)

Power

(Check Keys)

(Exit)

START

• Control panel check mode (01) :

Notes:

1. During the “Check keys” state, [CLEAR] alone can exit.

During the “LEDs light/LCD flashes” state, [CLEAR] can clear the mode.

2. Check keys :

Any key with LED (when it is pressed, the LED goes out.)

Any key without LED (when it is pressed, an indication is displayed in the message area.)

• Test mode (03)

: Refer to "1.2.1 Input check (Test mode 03)" and "1.2.2 Output check

(Test mode 03)".

• Test print mode (04)

: Refer to "1.2.3 Test print mode (04)".

• Adjustment mode (05) : Refer to "1.2.4 Adjustment mode (05)".

• Setting mode (08)

: Refer to "1.2.5 Setting mode (08)".