Toshiba FC-210 用户手册

February 2002  ©  TOSHIBA TEC

2 - 7

FC-210/310  ADJUSTMENT

(1)

At the time of unpacking

Prior to image dimensional adjustment, perform the “Automatic initialization of image quality control

(05-879)” procedure.

(2)

When any of the following parts is replaced, be sure to perform the  “Automatic initialization of image

quality control (05-879)” procedure.

• Processing unit (EPU)

• Transfer belt unit (TBU)

• Photoconductive drum

• Developer material

• Laser optical unit

• Image quality sensor

Note: When performing "Automatic gamma adjustment" in addition, “Automatic initialization of image quality

control” should be done first.

(3)

When performing "Automatic gamma adjustment" in cases other than the above ones, do the  “Forced

performing of image quality control (05-878)” procedure before "Automatic gamma adjustment".

Code

Adjustment item

Contents

878

Forced performing of

<Procedure>

image  quality  control

(1) While pressing [0] and [5] simultaneously, turn the power ON. 

Adjustment mode

(2) Enter [878] with digital keys and press the [START] key.

(3) When the adjustment finishes normally, the copier will return to

the adjustment mode’s initial state.

If an error has occurred, take appropriate action by referring to

“4. TROUBLESHOOTING”.

879

Automatic initialization of

<Procedure>

image  quality  control

(1) While pressing [0] and [5] simultaneously, turn the power ON. 

Adjustment mode

(2) Enter [879] with digital keys and press the [START] key.

(3) When the adjustment finishes normally, the copier will return to

the adjustment mode’s initial state.

If an error has occurred, take appropriate action by referring to

“4. TROUBLESHOOTING”.