Samsung 320P 用户手册

 

   

 

 

 

Check the following items yourself before calling for service. Contact the 

Service Center

 for 

problems that you cannot solve by yourself.  
 

Self-Test Feature Check

 | 

Not Optimum Mode

 | 

Maintenance and Cleaning

 | 

Symptoms & Recommended Actions

 

 

Your monitor provides a self test feature that allows you to check whether your monitor is functioning 
properly. 

1. Turn off both your computer and the monitor.  
2. Unplug the video cable from the back of the computer.  
3. Turn on the monitor.  

 
The figure shown below ("Check Signal Cable") appears on a black background when the monitor is 
in its normal working condition though it does not sense any video signal: While in the Self-Test 
mode, the LED power indicator remains green and the figure moves around on the screen. 
 

 

 

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the 

monitor.  

If your monitor screen remains blank after using the previous procedure, check your video controller and 
computer system; your monitor is functioning properly. 

 

 

You can view the screen even in more than 1360x768 resolution. However you will have the following 
message for a minute; You can choose to change the screen resolution or stay in the current mode during 
that time. And if the resolution is more than 85Hz, you will see the black screen because the monitor does 
not support over 85Hz.