Emerson MVME2500 用户手册
Chapter 7
MVME2500 Installation and Use (6806800L01H)
113
Programming Model
7.1
Overview
This chapter includes additional programming information for the MVME2500.
7.2
Reset Configuration
The MVME2500 supports the power-on reset (POR) pin sampling method for processor reset
configuration. Each option and the corresponding default setting are described in the
following table.
configuration. Each option and the corresponding default setting are described in the
following table.
Table 7-1 POR Configuration Settings
CONFIG
CONFIG PINS
CONFIG
SELECTION
REMARKS
1
CCB Config
LA[29:31]
000
41: CCB CLOCK-400 MHz
2
DDR PLL Config
TSEC_1588_CLK_O
UT
TSEC_1588_PULSE_
OUT1
TSEC_1588_PULSE_
OUT2
UT
TSEC_1588_PULSE_
OUT1
TSEC_1588_PULSE_
OUT2
001
8:1 DDR PLL-800 MHz
DDR rate is twice the
value of the DDR
controller frequency,
which is then divided by
two through the
software.
value of the DDR
controller frequency,
which is then divided by
two through the
software.
3
Core 0 PLL
LBCTL, LALE
LGPL2/LOE/LFRE
LGPL2/LOE/LFRE
110
3:1 CORE CLOCK PLL
(1200 MHz)
(1200 MHz)
For 1200 MHz board
configuration
configuration
100
2:1 CORE CLOCK PLL (800
MHz)
MHz)
For 800 MHz board
configuration
configuration
4
Core 1 PLL
LWE0, UART_SOUT1
110
3:1 CORE CLOCK PLL
(1200 MHz)
(1200 MHz)
For 1200 MHz board
configuration
configuration
100
2:1 CORE CLOCK PLL (800
MHz)
MHz)
For 800 MHz board
configuration
configuration
5
CPU Boot
Config
Config
LA27, LA16
10
e500 core 0 is allowed to
boot without waiting for
configuration by an
external master, while
e500 core 1 is prevented
from booting until
configured by an external
master or the other core.
boot without waiting for
configuration by an
external master, while
e500 core 1 is prevented
from booting until
configured by an external
master or the other core.