Fujitsu Siemens Computers 4312 FA 用户手册
Colour monitor 4312 FA
S26361-K841-V150-1-5E19
English - 9
Connecting the monitor
See your system unit's operating manual for details of the connectors and interfaces on the system
unit.
unit.
!
Please note the information provided in the "Safety" section in the chapter "Important
notes" at the beginning of this manual.
notes" at the beginning of this manual.
Do not cover the ventilation openings of the monitor.
1
2
3
4
5
Ê
Be sure that the monitor and the system unit are switched off.
!
The system unit's power plug must be pulled out!
The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the
system unit.
system unit.
Ê
Connect one of the connectors of the data cable to the D-SUB connector on the monitor (1)
and secure the plug-in connection by tightening the safety screws.
and secure the plug-in connection by tightening the safety screws.
Ê
Connect the other connector of the data cable to the (active) monitor port on the system unit
and secure the plug-in connection by tightening the safety screws (2).
and secure the plug-in connection by tightening the safety screws (2).