IBM 2256 用户手册
![IBM](https://files.manualsbrain.com/attachments/f70d337d03c66895b7a6fbe0e6de3554f47d7dd3/common/fit/150/50/fb4e568062ca4d0154259807170f4c71f2c7aafa861a4d9a0eb3af958af4/brand_logo.png)
See the following illustration for the location of parts on the system board.
1 Fan connector
11 Primary IDE connector
2 Microprocessor
12 Front USB connector
3 DIMM 1
13 Virtual clear CMOS/BIOS recovery jumper
(JP14)
(JP14)
4 DIMM 2
14 Battery
5 Power connector
15 PCI slot
6 Power connector
16 PCI slot
7 Hard disk LED connector
17 PCI slot
8 Power LED connector
18 CD-ROM audio connector
9 Diskette connector
19 Front panel connector
10Secondary IDE connector
Installing memory - small desktop model
Your computer has two connectors for installing dual in-line memory modules
(DIMMs) that provide up to a maximum of 512 MB of system memory.
(DIMMs) that provide up to a maximum of 512 MB of system memory.
Installing DIMMs
When installing DIMMs, the following rules apply:
v Fill each system memory connector sequentially, starting at DIMM 1
v Use 3.3 V, synchronous, 168-pin, unbuffered, 133 MHz, nonparity, synchronous
v Fill each system memory connector sequentially, starting at DIMM 1
v Use 3.3 V, synchronous, 168-pin, unbuffered, 133 MHz, nonparity, synchronous
dynamic random access memory (SDRAM)
v Use 32 MB, 64 MB, 128 MB, or 256 MB DIMMs in any combination
v DIMM heights of 38.1 mm (1.5 inches)
v DIMM heights of 38.1 mm (1.5 inches)
To install a DIMM:
28
Hardware Maintenance Manual