SharkRack 45U 用户手册

ID-00210-000 

REV D, ECO2773 

Page 6 of 46 

 

Ensure that the following conditions are met: 

•  Floor is level and of sufficient strength to support the rack and your equipment. At 

maximum gross weight, the floor must be able to support 1000 lb/in

2

.   

•  A qualified professional should complete site electrical power supply set-up. Ensure the 

types of outlets are consistent with the type of plugs on the power devices to be used. 

•  Check with a qualified HVAC technician to make sure the environment will support the 

heat load of the products being installed in the cabinet. 

•  Select a location for the cabinet that will allow adequate space for the door to open freely 

and slide-mounted equipment to be extended. 

•  Check that the site can accommodate the cabinet footprint and mounting locations 

according to the illustrations in Figure 3 and Figure 4.