Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 用户手册
- 51 -
Function Description
Support
<Device Line Substitution>
When enabled, the driver will try to use the printer's
Line Commands to draw lines.
When disabled, lines are drawn by using the
Graphic Command.
When enabled, the driver will try to use the printer's
Line Commands to draw lines.
When disabled, lines are drawn by using the
Graphic Command.
{
<Default Copies>
Allows setting the number of copies to be printed as
default. If the number of copies is not changed
in the application, this value will be effective.
Allows setting the number of copies to be printed as
default. If the number of copies is not changed
in the application, this value will be effective.
{
<Disable Copies Limit>
When enabled, a value exceeding “9999” can be
set for the “Default Copies”.
When enabled, a value exceeding “9999” can be
set for the “Default Copies”.
X
Driver Options tab
<Disable User-Defined Paper Size>
When this checkbox is checked, the user-defined
paper size “USER” cannot be used.
When this checkbox is checked, the user-defined
paper size “USER” cannot be used.
X
Resolution
Shows the printer’s available resolution.
{
Allows creating the illusion of different shades of
gray by varying the pattern of dots.
gray by varying the pattern of dots.
{
<Color Adjustment>
Allows the flip horizontal, flip vertical, rotation, color
balance adjustment, etc.
Allows the flip horizontal, flip vertical, rotation, color
balance adjustment, etc.
{
Dithering
<Dithering Setup>
Allows detailed setting for the selected dithering
method.
Allows detailed setting for the selected dithering
method.
{
Graphics tab
Color <Color
Control>
Allows setting the color processing.
{
<Print Method>
Allows selecting whether the ribbon is used (thermal
transfer) or not (Direct thermal).
Allows selecting whether the ribbon is used (thermal
transfer) or not (Direct thermal).
{
<Sensor>
Allows selecting a sensor type used to detect a print
start position.
Allows selecting a sensor type used to detect a print
start position.
{
Media settings
<Label Gap>
Allows setting the length of the gap between labels.
Allows setting the length of the gap between labels.
{
<Issue Mode>
Allows selecting whether the labels are issued in the
strip mode.
Allows selecting whether the labels are issued in the
strip mode.
{
<Post-Print>
Allows selecting whether the labels are issued in the
cut mode. Note that the Pause is not supported.
Allows selecting whether the labels are issued in the
cut mode. Note that the Pause is not supported.
{
<Occurrence>
Allows selecting the cutter operation and specifying
how often labels should be cut.
Allows selecting the cutter operation and specifying
how often labels should be cut.
{
<Interval>
Specifies the number of labels to be printed before a
cut operation. The cutter will cut labels after the
specified number of labels is printed.
Specifies the number of labels to be printed before a
cut operation. The cutter will cut labels after the
specified number of labels is printed.
{
Issue Settings
<Print Speed>
Allows setting the print speed.
Allows setting the print speed.
{
{
<Feed>
Specifies the length of label that will feed after
printing.
Specifies the length of label that will feed after
printing.
{
<Backfeed>
Specifies the length of label stock that is retracted
before printing. This entry window is only available
in cut or strip mode.
Specifies the length of label stock that is retracted
before printing. This entry window is only available
in cut or strip mode.
{
Stock
Fine Adjustment
<Cut/Strip>
For the cut issue, specifies the length of label to feed
before cutting the label.
For the strip issue, specifies the length of label to
feed before peeling the label.
For the cut issue, specifies the length of label to feed
before cutting the label.
For the strip issue, specifies the length of label to
feed before peeling the label.
{