Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 用户手册

- 61 -

•

Function Character

When a bar code font is used for printing, use of the function character enables encoding binary data. The
default setting is a caret [^] (5EH).

The following explanation is based on an assumption that the caret [^] (5EH) is used.

Entry in hex. format

^#nn

<Example> To specify binary data of 00 to 06:

^00^01^02^03^04^05^06

Entry with abbreviation

^<ccc>

<Example> To specify binary data of 00 to 06:

^<NUL>^<SOH>^<STX>^<ETX>^<EOT>^<ENQ>^<ACK>

Entry of the function character

When using the function character as bar code data, send the function
character twice.

Driver Option tab

Device Line Substitution

• Enable Substitution

This option allows selecting whether or not to
substitute a line drawn in a print image with a Line
Command.
When this checkbox is not checked, the line is
processed as a Graphic Command.
When checked, the line is drawn using the
printer’s line drawing function, which may result in
higher throughput.

• Minimum Length

The minimum length of a line that is to be
recognized as a Line Command. The line
shorter than this value is processed as a Graphic
Command.

Note: Some applications do not always print correctly with this feature enabled. In such case, remove the check from

the check box.

Software Compatibility

• Default Copies

The number of labels to be printed as default. Unless this number is changed with the application, this
value will be effective.

Binary data

<NUL> 00

<DLE> 10

<SOH> 01

<DC1> 11

<STX> 02

<DC2> 12

<ETX> 03

<DC3> 13

<EOT> 04

<DC4> 14

<ENQ> 05

<NAK> 15

<ACK> 06

<SYN> 16

<BEL> 07

<ETB> 17

<BS> 08

<CAN> 18

<HT> 09

<EM> 19

<LF> 0A

<SUB> 1A

<VT> 0B

<ESC> 1B

<FF> 0C

<FS> 1C

<CR> 0D

<GS> 1D

<SO> 0E

<RS> 1E

<SI> 0F

<US> 1F

<DEL>