Toshiba B-EX 用户手册
56
[Q Value]:
Set the sensitivity for detecting RFID tags.
Default 0
Range
Range
0 to 15
[AGC Threshold]:
Set the threshold value used to determine an RFID tag is defective or not.
Default 0
Range
Range
0 to 15
[Write AGC Threshold]:
Set the threshold value used to determine whether or not to write data to RFID tags.
Default 0
Range
Range
0 to 15
[Write Retry Min. AGC]:
Set the lower limit value used to determine whether or not to retry a data write.
Default 0
Range
Range
0 to 15
[RF Channel]:
Set a channel used for data write.
Default AUTO
Options
Options
AUTO, 2 CH, 3 CH, 4 CH, 5 CH, 6 CH, 7 CH, 8 CH
[Multi-word Write]:
Select whether or not to enable the multi-word write function for Gen2-compatible Hibiki tag.
When this function is used, the data write efficiency is increased.
When this function is used, the data write efficiency is increased.
Default Disable
Options Disable,
Options Disable,
Enable
[Retry] Group
[Retry Position Adjustment]:
Set the amount the printer feeds the RFID label forward or backward to retry a data write.
Default 0
mm
Range
-99 to 99 mm
[Issue Retry Labels]:
Set the number of RFID labels to be issued for retry.
Default 3
labels
Range
0 to 255 labels
[Read Retry Count]:
Set the max. number of times reading one RFID tag is retried.
Default 5
times
Range
0 to 255 times
[Read Retry Timeout]:
Set the timeout value for retry to read one RFID tag.
Default 4.0
sec
Range
0.0 to 9.9 sec
[Write Retry Count]:
Set the number of times writing data to one RFID tag is retried.
Default 5
times
Range
0 to 255 times
[Write Retry Timeout]:
Set the timeout value for retry to write data to one RFID tag.
Default 2.0
sec
Range
0.0 to 9.9 sec