Toshiba DP120F 用户手册

When the correct number is dis-
played, press:

Once an Abbreviated Dial Num-
ber is programmed with a valid
remote facsimile location, that
location can be accessed by re-
calling the corresponding Abbre-
viated Dial Number.

The document must be loaded
and the resolution and contrast
set before a transmission using
Abbreviated Dialing (see page
89).

Press:

+

Enter the Abbreviated Dial
Number (1 to 999) assigned to
the desired party.

During transmission

When the number entered
(within the range of 1 through
999) is not preprogrammed
with a specific party’s fac-
simile or telephone number,
the message “NUMBER NOT
LISTED” is displayed for 2
seconds and then the fac-
simile returns to the screen in
Step 1.

ABB. NUMBER =(1-999)

COMM. RESERVATION

ABB. NUMBER =(1-999)

                 10

ABB. NBR=         10

LONDON OFFICE

ABB. NBR=         10

NUMBER NOT LISTED

When an incorrect number is

entered, use 

 to delete

preceding digits, or press

 once to start over

from the beginning.

Example of Abbreviated Dial
Number, 10:

The One Touch key or Abbrevi-
ated Dial Number and the name
of the party will appear on the
LCD display for about 2 sec-
onds.

Your facsimile will automatically
start scanning the document into
memory (if enabled). While
scanning, the facsimile dials,
connects, and starts the trans-
mission.

Displayed for 2 second

SCANNING TO MEMORY

FILE NBR =      091

RESIDUAL MEMORY 99%

MAY-17-00 WED11:49

RESIDUAL MEMORY 99%

During scan to memory

Displayed for 2 seconds