Toshiba DP120F 用户手册
103
This procedure will discuss Di-
rect Transmission when se-
lected as the default setting or
when Residual Memory has
been depleted.
rect Transmission when se-
lected as the default setting or
when Residual Memory has
been depleted.
Load the document face down
in the Document Tray (see
page 88).
in the Document Tray (see
page 88).
Adjust the resolution and con-
trast if desired (see page 89).
trast if desired (see page 89).
Dial the facsimile number of the
remote party using any of the
four dialing methods.
remote party using any of the
four dialing methods.
•
One Touch Key Dialing
... See page 97
... See page 97
•
Abbreviated Dialing
... See page 98
... See page 98
•
Alphabet Dialing
... See page 99
... See page 99
•
Keypad Dialing
... See page 100
... See page 100
•
Press
if a dialing er-
ror occurs.
Example of screen displayed
while a number is entered using
Keypad Dialing:
while a number is entered using
Keypad Dialing:
Once the facsimile number is
entered, the dialing starts.
entered, the dialing starts.
Direct Transmission is used if
there is not enough residual
memory or when a large num-
ber of document pages are to
be sent, etc.
there is not enough residual
memory or when a large num-
ber of document pages are to
be sent, etc.
This mode is also useful if the
operator wishes to visually con-
firm the actual transmission of
the document to the remote par-
ty.
operator wishes to visually con-
firm the actual transmission of
the document to the remote par-
ty.
The documents will remain in
the ADF and be transmitted one
by one.
the ADF and be transmitted one
by one.
Direct Transmission
Load the Document
1
Dial the Facsimile
Number
Number
2
Start Dialing
3
Example of screen displayed
when Residual Memory has
been depleted:
when Residual Memory has
been depleted:
MAY-17-00 WED11:49
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
MAY-17-00 WED11:49
RESIDUAL MEMORY 0%
ENTER TEL NUMBER
DIALING
FILE NBR = 025
0559761234
WAITING TO REDIAL
RESIDUAL MEMORY 100%
MAY-17-00 WED11:59
LINE BUSY
If the destination facsimile is
busy, the screen below is dis-
played.
busy, the screen below is dis-
played.
If the redial procedure is com-
pleted without success, the
screen below is displayed and
this transmission job is can-
celled.
pleted without success, the
screen below is displayed and
this transmission job is can-
celled.
Direct Transmission as Default Setting
Connect the Line to
the Remote Party
the Remote Party
4
Once connected to the destina-
tion facsimile, the screen below
is displayed.
tion facsimile, the screen below
is displayed.
COMMUNICATING
FILE NBR = 025
0559761234
COMMUNICATING
FILE NBR = 025
+81 559 761234
The remote party Terminal ID
will be displayed as shown be-
low.
will be displayed as shown be-
low.
COMM. RESERVATION
TEL NUMBER =(MAX128)
0559761234