HP (Hewlett-Packard) 1230 SERIES 用户手册

load originals and load paper

When you load your original document into the automatic document feeder

(ADF), you can copy it onto a variety of paper types, weights, sizes, and

transparency films. It's important to select the right paper, and to make sure it's

loaded correctly.
This section contains the following topics:
•

•

•

•

•

•

•

•

load originals

Load your original in the ADF, which is located above the front panel as

illustrated below, to copy it or to fax it.
If you are working with originals that are printed on 16-24 lb. (60-90 gsm) plain

paper or on HP Premium Inkjet Paper, you can load more than one page at a

time into the ADF. If you are working with photos or originals of an non-standard

size (no smaller than 3.25 x 3.25 inches or 82 x 82 millimeters), load them in

the ADF one page at a time. When working with fragile, torn, or odd-sized

originals, we recommend that you use a transparent document sleeve or sheet

protector (available from most office-product stores) for the original. Place a

single sleeve into the ADF with the sealed edge first and the transparent side

down.

Note: If you have trouble with originals feeding incorrectly, make sure the

ADF tray is snapped into position.

Place the original(s) in the ADF

with the printed side facing

toward the back and with the