Zoom 1064 Series 用户手册

 

12 

ADSL X4 User Guide 

Important! 

You must ensure that your computer’s TCP/IP settings are 
configured properly. See Macintosh TCP/IP Settings on page 47 
or Linux TCP/IP Settings on page 49 for instructions on how to 
do this. 

You must set up the X4 so that it can communicate with your 
Internet service provider. To do this, you use the Zoom 
Configuration Manager. 

1 

Follow these two steps to log in to the Zoom Configuration 
Manager: 

a 

Open your Web browser and, in its address bar, type 
http://10.0.0.2 if you are using the Ethernet jack or 
http://10.0.0.3 if you are using the USB port (Windows 
only), then press the Enter key on your keyboard. 

b 

When prompted, type the following user name and 
password in the appropriate boxes, then click OK. You 
must enter them using lowercase letters. 

User Name: admin 
Password: zoomadsl 

If you are not prompted for a user name and password, do 
the following in this order: Recheck all connections; restart 
the modem and computer; and reset the modem by 
inserting a paper clip into the Reset pinhole in the center 
of the modem’s back panel and holding it for five seconds. 
The user name and password you enter here do not serve 
the same purpose as any name and password that your 
Internet service provider may have given you.