Fujitsu 480 用户手册

下载
页码 854
C122-E003-02EN
8-133
 
GSWB
8.2 Configuration Definition Commands
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, 
collect unit information, configuration definition information, and the 
information in different types of logs, and restart the unit.  Alternatively, 
contact a certified service engineer.
8.2.20
ssh
8.2.20.1 ssh enable
This command enables the ssh server using the specified protocol:
z SSH connection is disabled by default.
z An operation command must be used to create a key file before SSH is enabled.
z User authentication supports only password authentication (the client side does not 
have the public key).
z The supported SSH protocol versions are RSA Version1, RSA Version2, and DSA 
Version2.
z If no parameter is specified in the ssh enable command, all authentication methods 
of rsa1, rsa, and dsa are enabled.
z If the ssh enable command is executed when no key file has been created, no error 
occurs, but no connection using ssh can be established.  In such cases, create a key 
file by executing the ssh keygen command.
z If another ssh enable command is executed after a ssh enable command, the 
settings in the command executed last are used to enable ssh.
 
Example: If rsa1, rsa, and dsa are already enabled when the ssh enable rsa 
command is executed, the server is restarted with only rsa enabled.
z A connection cannot be established from a business LAN by only executing the ssh 
enable command.  Setting must be made with the remote-access command to allow 
connections.
z Only one connection can be established at a time.
z If ssh is disabled when a connection using ssh has been established, the connection 
is not terminated.