Toshiba Pro A300D 用户手册

User’s Manual

8-11

Optional Devices

You can increase the portability of the computer with additional battery 

packs (3 cell: PA3533U-1BRS/PA3533U-1BAS, 6 cell: PA3534U-

1BRS/PA3534U-1BAS, 9 cell: PA3535U-1BRS/PA3535U-1BAS). If you’re 

away from an AC power source, you can replace a low battery with a fully 

charged one. See Chapter 6, 

If you frequently transport the computer between different sites such as 

your home and office, purchasing an AC adaptor(PA3468U-1ACA, 

PA3468E-1AC3, PA3516U-1ACA, PA3516E-1AC3, PA3290U-3ACA, 

PA3290E-3AC3) for each location will reduce the weight and bulk of your 

carrying load. 

The 3 1/2" external FDD drive module can be connected to the USB port.

An external analog monitor can be connected to the external monitor port 

on the computer, Port Replicator. The computer supports VGA and Super 

VGA video modes. To connect a monitor, follow the steps below.

1. Connect the monitor to the external monitor port.
2. Turn the monitor’s power on.

When you turn on the power, the computer automatically recognizes the 

monitor and determines whether it is color or monochrome.
You can use the HW Setup to select between Auto-Selected and 

LCD+Analog RGB displays. Refer to Chapter 7, 

If you have selected LCD+Analog RGB under the Display options of the HW 

Setup, both the external monitor and the internal LCD will be active when 

you turn on the computer. If Auto-Selected is selected, only the external 

monitor will be active.