Raritan Computer EMX2-111 用户手册
Chapter 5: EMX Device Management
86
3. Select the "enable" checkbox in the "SNMP v1 / v2c" field to enable
communication with an SNMP manager using SNMP v1 or v2c
protocol.
protocol.
Type the SNMP read-only community string in the Read
Community String field. Usually the string is "public."
Type the read/write community string in the Write Community
String field. Usually the string is "private."
4. Select the "enable" checkbox in the "SNMP v3" field to enable
communication with an SNMP manager using SNMP v3 protocol.
Tip: You can permit or disallow a user to access the EMX via the
SNMP v3 protocol. See
SNMP v3 protocol. See
Configuring Users for Encrypted SNMP
v3
(on page 208).
5. Enter the MIB-II system group information, if applicable:
a. sysContact - the contact person in charge of the system being
contacted
b. sysName - the name assigned to the system
c. sysLocation - the location of the system
6. Select the MIB to be downloaded. The SNMP MIB for your EMX is
used by the SNMP manager.