RATOC Systems CBFW3 用户手册

To use the CBFW3 on Windows, follow the steps.

1.Insert the CBFW3 into the PC Card slot. Refer to the Chapter 2-1.

2.Install the OHCI driver. Refer to the Chapter 2-2.

3.Connect an IEEE1394 device to the CBFW3.

    If you connect a DVCAM, refer to the Chapter 2-3.

    If you connect a CCD camera, refer to the Chapter 2-4.

    If you connect a 1394 storage device, refer to the Chapter 2-5.

4.If you want to capture a video from a DVCAM, install RsDvCap. Refer to the Chapter 3.

Insert the CBFW3 into the PC Card slot as shown below.

Refer to the manual that accompanied with your PC for the location of the PC Card slot.

     You may not be able to insert another PC Card with the CBFW3 simultaneously.