RTS DKP 16 CLD 用户手册
74
4.
Using the 3(
↑) or 6(↓), select Sidetone.
5.
Press the SEL button.
Level and Mode appear in the display window.
Level and Mode appear in the display window.
6.
Using the 3(
↑) or 6(↓), select Mode.
7.
Press the SEL button.
Always On, Disabled, and Switched appear in the display window. By default, Switched is selected.
Always On, Disabled, and Switched appear in the display window. By default, Switched is selected.
8.
Using the 3(
↑) or 6(↓), select the mode to operate sidetone.
9.
Press the SEL button.
10.
Run “Menu System, Save Config” on page 107 to save the modification to non-volatile memory.
Audio Options Menu, Speaker
The Speaker menu option is used to configure how the speaker operates. When a GPI 32 CLD option card is installed, Front
and Rear options are displayed.
and Rear options are displayed.
You can configure the speaker with one of the following:
Always ON - no matter what is selected, Always ON overrides the manual selection.
Disabled
Switched (default) - when enabled, whichever mic is selected, the corresponding speaker/headphone is active.
NOTE:
Where the audio is heard, is directly related to the state of the Mic Mute/Mic Select switch.
See “Reference View - KP 32 CLD (90007858000)” on page 6.
To configure the speaker, do the following:
1.
On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
The Top Level menu appears.
2.
Using the 3(
↑) or 6(↓), select Audio Options.
3.
Press the SEL button.
The Audio Options menu appears.
The Audio Options menu appears.
4.
Using the 3(
↑) or 6(↓), select Speaker.
FIGURE 63.
Sidetone Mode Options