RAD Data comm ASMi-52 用户手册

Appendix B  IR-IP Interface Module 

Installation and Operation Manual 

B-22 

Using the Device Control Menu 

ASMi-52 Ver. 2.5 

Selecting Erase Configuration allows you to reset all the configuration parameters 
to their default values. 

 

•  Do this only if you need to reconfigure the module anew (all the parameters). 
•  After erase confirmation all connections with the IR-IP module will be lost. For 

 

The Reset menu allows you to perform reset of IR-IP, or its interfaces. 
This operation can be used to restore normal operation after service is disrupted 
by an abnormal condition. Any data stored in the IR-IP buffers is discarded, and 
the flow of traffic is temporarily interrupted. 

IR_IP 

 

<IR-IP> 

S/W Ver. 1.21 (date) 

 
Quick Setup 
Management Access 
Advanced Setup 
Device Control 

..................................................................... 

 

New Software Download 

 

View error LOG 

 Resets 

===================================================================== 
 

1. Reset Device 

 

2. Reset LAN 

 

3. Reset WAN 

Press one of the numbers to select or ESC: 

 

To restart IR-IP: 
•  From the Device Control menu, select Resets. From the Resets menu, type 1. 

You will be prompted to confirm the reset operation. 

 

 

 

To reset the LAN interface: 
•  From the Resets menu, select Reset LAN. 

You will be prompted to confirm the reset operation.