Fujitsu 2.1 用户手册
Chapter 8 Commands
8.2 Update Volume Measurement Command (stxvtestcopy)
8.2 Update Volume Measurement Command (stxvtestcopy)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED
P3AM-4582-03ENZ0
55
■
Description of operand
*1:
Obtain the physical disk number according to the following procedure.
1. Start "Computer Management".
Click the [Start] – [Control Panel], then double-click [Administrative Tools], then [Computer
Management] to start.
Management] to start.
2. Obtain the physical disk number of the target disk.
Click [Computer Management (local)] – [Storage] – [Disk Management].
The disk number of the target volume is the physical disk number.
The disk number of the target volume is the physical disk number.
*2:
Specify the mount point using its complete path or drive letter.
■
Execution example
■
Displayed contents
Operand
Description
source-disk
Specifies the physical disk number of the target source disk. (*1)
mount-point
Specifies the mount point of the target source disk. (*2)
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvtestcopy"
start -p 1
stxvtestcopy successfully completed.
start -p 1
stxvtestcopy successfully completed.
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvtestcopy"
status -p 1
source-disk update
1 2
stxvtestcopy successfully completed.
status -p 1
source-disk update
1 2
stxvtestcopy successfully completed.
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvtestcopy"
stop -p 1
stxvtestcopy successfully completed.
stop -p 1
stxvtestcopy successfully completed.
C:\>
Title
Description
source-disk
The physical disk number of the source disk is displayed.
update
The updated data amount after starting measurement is displayed in MB.
•
Data backup is not performed while the amount of updates is being measured.