3M MP8760 用户手册



 3M IPC 2000

3M



 Multimedia Projector MP8760

3

The MP8760 projector has terminal connections on the backside of the projector. Refer to Section 3.4-Cable
Connections for more detail.

1.  AUX: Only compatible with 3M devices.
2.  SVHS/AUDIO IN: SVHS and audio input.
3.  VIDEO1/AUDIO IN: Video1 and audio input.
4.  VIDEO2/AUDIO IN: Video2 and audio input.
5.  RS-232C: Mouse emulation/external projector control.
6.  MONITOR: Output to external monitor.
7.  PC/RGB1: Video input #1 from computer.
8.  PC/RGB2: Video input #2 from computer.
9.  AUDIO IN2: Audio L/R input from computer #2
10.  AUDIO IN1: Audio L/R input from computer #1.
11.  AUDIO OUT: Audio L/R output to external audio system.

The MP8760 operator touch panel keypad (Figure 3-2) is located on top of the projector.  Refer to Section 4 for more
detail on using the keypad.

1.  Zoom: Adjust (decrease/increase) image size.
2.  Video: Select Video1, Video2 or S-VHS input
3.  PC: Select PC/RGB 1/2 input.
4.  Enter: Initiate drop windows, toggle check box

(on/off), display Info sub-menu or press and hold
then use Disc Pad to reposition menu location.

5.  Volume (-/+): Adjust (increase/decrease) audio

level.

6.  Mute: Toggle speakers on/off.
7.  Brightness (-/+): Adjust image brightness.  (See

Menu.)

8.  Disc/Pad: Move cursor up/down, left/right.
9.  Menu: Display/remove menus.

Menu (-/+): Increase/decrease menu value.

10.  Aux: Toggle On/Off a 3M compatible device.
11.  Focus: Adjust image focus.
12.  Standby: Switch between standby mode (lamp

off, fan off after cool down) and projection mode
(lamp on, fan on).