3M MP7760 用户手册

™

Multimedia Projector MP7760

Section 4: Operating Instructions

4-1. Power Up Projector

Read the Important Safeguards before operating the MP7760 projector. After all cable connections have been
completed, the projector can be powered up. During operation, keep the exhaust and intake air vents clear of
obstructions to allow proper cooling.

Figure 4-1. Power Up Projector

1. Press the Main Power switch ➊ to ON. A red LED indicator in Standby button will illuminate to

indicate there is power.

2. Press the Standby button to illuminate the lamp. The red LED indicator will turn green as an image

appears and grows brighter on the screen.

3. Check all ventilation slots and clear away all obstructions.

ü Note: Ventilation vents are located on the top and back of the projector.

Do not block airflow by placing objects on top of the projector.

4. Adjust the Zoom and Focus for best image.
5. Press the Foot Release button to release the Height Adjustment Foot .
6. Power up your computer and video source(s).

ü Note: In most cases, the projector will automatically adjust to the graphic

mode of your computer by selecting a pre-programmed setting.

Caution

Allow a projector that has been stored in a cold place to warm up to room temperature
before applying power.