3M MP8610 用户手册



3M 1998

3M



 Multimedia Projector MP8610

11

Press to switch the projector between Standby
mode (lamp off, fan off) and operation mode (lamp
on, fan on).

PC

Switches to PC mode.

VIDEO

Switches to video mode. When in video mode, the
video source can be selected (Video or S-Video) by
pressing the key repeatedly.

AUX

Not used

MENU

Start the On Screen Menu System for projector
adjustment.

DISC PAD

Mouse emulation ON, disc pad controls the
movement of the pointing device.
Emulation OFF, disc pad centers image on screen.

L/ENTER

Mouse emulation ON, left mouse button.  Mouse
emulation OFF, Enter button for confirmation of a
selection.

R

Right mouse button, when mouse-emulation active.

1-6

Not used.

REVEAL/7

Press REVEAL to cover the image on the screen
with a gray mask. Use the disc pad to reveal the
image or press REVEAL again to return full screen
projection of image.

BLANK/8

Removes projected image, white background.
Press again to return projection image.

TIMER/9

When the key is operated the timer-window appears
in the lower part of the display. Repeated operation
of the key switches over to full image display of the
timer and back to data projection. The timer starts
with the last used adjustment. A new start value is
entered by operating the key ENTER and adjusting
the value with the disc pad. Operating the ENTER
key again starts the timer. When the timer has run
down, the timer window blinks repeatedly.

OPTIMIZE

Optimize (adjust) brightness and contrast settings
for best picture.

VOL

Volume adjustment.
Mute.

 BRIGHT

Brightness adjustment.

MOUSE

Press ON/Off to activate/deactivate mouse
emulation capability.
ON: The L and R buttons operate the left and right
mouse key functions.  Drag-and-drop functions are
possible by simultaneous operation of the L/R
mouse key and disc pad.
OFF: L button is the Enter confirmation key.
R button not used.  Disc pad centers image.

POINTER

Places a pointing device on the screen. Move
pointer by operating the disc pad.

MAGNIFY

Press MAGNIFY to double the image size in
horizontal and vertical direction. The details of the
middle of the picture can be seen. Move the disc
pad to displace the magnified area within the image.
Press the MAGNIFY key again to switch back to
normal presentation.
In Video mode, press  MAGNIFY to switch between
scaled and unscaled representation. This is only for
NTSC video.

FREEZE

Stores (freezes) the projected image. Press
FREEZE again to return the projection of the
current image.

Figure 5-3.  Remote Control

1

2

3

4

5

6

7

8

9

0

8610-05aA