3M MP8770 用户手册

3M

™

 Multimedia Projector MP8770

© 3M 2000

ENGLISH

12

Section 3: Basic Operations

EPS-130A

Do not turn off the POWER SWITCH before pressing the STANDBY/ON button.  After the STANDBY/ON button is
pressed, the fan rotates for about 1 minute to cool the projector.

 of the projector on. The POWER indicator will light up orange.

 .  The POWER indicator blinks (green) and then lights (green).

The POWER indicator will blink green during warm-up and lamp ignition. When power is turned off,

there is a 60 second reset period before the STANDBY/ON button will function again.

4. Adjust the screen size by pressing the ZOOM button. 

5. Adjust the focus by pressing the focus button. 

Press any other button to make the focus screen disappear.

6. Turn on all connected equipment. Refer to section 2.3.

7. Press the INPUT button 

 on the projector or the INPUT SELECT (VIDEO or RGB) button on the

remote to select the source of the signal to be projected on the screen. The selected signal input is

displayed at the bottom right of the screen.  The display will show the last selected input source before

power was turned off.

  for 1 second. The POWER indicator blinks orange and the lamp

turns off. After approximately 1 minute, the fan stops and the indicator stays orange.

2. Turn the MAIN POWER SWITCH 

 of the projector off.