3M MP8770 用户手册
3M
™
Multimedia Projector MP8770
© 3M 2000
ENGLISH
16
Decrease
Increase
Dark
Bright
Lower
Higher
Soft
Sharp
Less
More
Red
Green
Moves the picture up or down.*
Moves the picture left or right.*
Decreases the picture flicker.*
Widens or Narrows the horizontal
size of picture.*
Less red
More red
Less blue
More blue
4.7 SETUP
The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4)
or Video (Figure 4.5) menu according to the input source being projected.
or Video (Figure 4.5) menu according to the input source being projected.
RGB signal input
Video signal input
Figure 4.4 RGB Signal
Figure 4.5 Video Signal
VOLUME
SETUP
BRIGHT
CONTRAST
V POSIT
H POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
COLOR BAL B
INPUT
IMAGE
OPT.
121
57
800
7
VOLUME
SETUP
CONTRAST
BRIGHT
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
INPUT
IMAGE
OPT.
VOLUME
BRIGHT
(BRIGHTNESS)
(BRIGHTNESS)
CONTRAST
SHARPNESS
COLOR
TINT
V.POSIT
(V.POSITION)
(V.POSITION)
H.POSIT
(H.POSITION)
(H.POSITION)
H.PHASE
H.SIZE
COLOR BAL R
COLOR BAL B
Adjustment Item
*Auto Sync Function: Press the AUTO button on the remote control to engage the automatic sync function. The message
“AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT. H.PHASE, & H.
SIZE settings. Auto Adjust can also be executed using the operation buttons of the main unit. Hold down the RESET button
and press the input switch (INPUT) button.
“AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT. H.PHASE, & H.
SIZE settings. Auto Adjust can also be executed using the operation buttons of the main unit. Hold down the RESET button
and press the input switch (INPUT) button.
✔ Note
•
TINT cannot be adjusted with a PAL, SECAM, N-PAL or M-PAL video signal input.
•
TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.
•
V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.
•
Menu operation is not possible during freeze functions.
•
Displaying the Setup menu will cancel the magnify and freeze functions.