3M MP410 用户手册

English

3M™ Mobile Projector MP410

Power

Select and press to activate power settings. The power menu provides the following

options:

Power Saving
Select Off to disable Power Saving mode. By default, the projector is set to enter

power saving mode after 120 minutes of no activity. A warning message appears on

screen showing a 60 seconds countdown before switching to power saving mode.

Press any button during the countdown period to stop the power-saving mode.

You can also set a different delay period to enter power saving mode. The delay

period is the time you want the projector to wait without an input signal. Power saving

can be set to 30, 60, 90, or 120 minutes. If an input signal is not detected during the

delay period, the projector turns off. To turn on the projector, press the Power button.
LED Mode
Allows you to select between Normal or ECO mode. Normal mode operates at full

power level. ECO mode operates at a lower power level which may provide longer

LED life, quieter operation, and dimmer luminance output on the screen.
Projector Mode
Allows you to select the projector mode, depending upon how the projector is

mounted.

Front: This is the default option.
Rear: The projector reverses the image so that you can project from behind a

translucent screen.
Front Ceiling: The projector turns the image upside down for ceiling-mounted

projection.
Rear Ceiling: The projector reverses and turns the image upside down. You can

project from behind a translucent screen with a ceiling-mounted projection.






